Heating Services Andover, Marlborough & Hungerford
Your complete guide to wet-side heating work. From radiator installation and power flushing to wet underfloor heating, central heating pumps and hot water cylinders -- by a qualified, WaterSafe approved local plumber. We don't work on gas or oil, and we'll gladly recommend a trusted Gas Safe engineer for your boiler.
Why Choose a Local Heating Specialist in Andover?
Finding a qualified tradesperson you can trust is essential for keeping your home warm, comfortable, and energy-efficient. Whether you need a new radiator fitted, a power flush, or a wet underfloor heating system installed, working with a local WaterSafe approved plumber means faster response times, better knowledge of local property types, and genuine accountability.
Based in Great Bedwyn (SN8), I serve homeowners across Andover (SP10/SP11), Marlborough (SN8), Hungerford (RG17), and Tidworth (SP9). I look after the wet side of your heating -- radiators, pipework, pumps, hot water cylinders and underfloor heating. I don't work on gas or oil, so if your boiler needs attention I'll happily recommend a trusted Gas Safe engineer. This guide covers everything you need to know about heating work in the area, from spotting common faults to honest pricing.
Heating Services We Provide in Andover, Marlborough & Hungerford
I provide a full range of wet-side domestic heating services. Every job comes with a 12-month workmanship guarantee, transparent pricing, and the reassurance of working with a qualified, insured professional. Please note we don't work on gas or oil boilers -- for those we'll recommend a trusted Gas Safe engineer.
Pumps, Cylinders & Immersion Heaters
I replace failed central heating pumps, fit and repair immersion heaters, and install or swap hot water cylinders -- including unvented (G3) systems such as Megaflo. If you've lost hot water, your pump is noisy or seized, or your cylinder is past its best, I can put it right on the wet side. Anything involving the gas or oil boiler itself is a job for a Gas Safe registered engineer, who I'm glad to recommend.
From £150 + VAT
Radiator Installation & Replacement
Whether you need an additional radiator in a cold room, are upgrading old panel radiators to modern high-output models, or replacing leaking valves, I can help. I fit both standard convector radiators and designer or column radiators, complete with thermostatic radiator valves (TRVs) for individual room temperature control.
Power Flushing
If your radiators have cold spots, your system is noisy, or your boiler keeps losing pressure, sludge buildup is often the cause. Power flushing uses a high-flow pump and specialist chemicals to remove rust, scale, and debris from your entire central heating system. I recommend a power flush every 5-10 years, or before fitting a new boiler to protect it from contamination.
Central Heating Systems
From diagnosing why certain rooms are cold to upgrading your entire central heating system, I handle all aspects of domestic heating. This includes re-piping, zone valve replacement, pump upgrades, magnetic filter installation, and heating controls. I also fit smart thermostats and programmers to give you better control over your heating and reduce energy bills.
Underfloor Heating
Underfloor heating is increasingly popular in Andover and Marlborough homes, particularly in kitchens, bathrooms, and extensions. I install both wet (water-based) and electric underfloor heating systems. Wet systems are ideal for new builds and extensions, while electric systems suit retrofit projects and smaller areas. Both options work well with heat pumps.
Heating System Upgrades
Older heating systems waste energy and cost more to run. I can assess your current setup and recommend cost-effective wet-side upgrades, whether that means fitting a magnetic system filter, replacing a tired central heating pump, adding TRVs throughout the house, or preparing your pipework for a future heat pump. Every upgrade is designed to improve comfort and reduce running costs. Where a new boiler is the answer, I'll point you to a trusted Gas Safe engineer.
Day rate: £525 for larger projects
Common Heating Problems in Andover & Marlborough Homes
The properties in Andover (SP10/SP11), Marlborough (SN8), and the surrounding villages range from period cottages with original pipework to modern estates like Augusta Park. Each type presents different heating challenges. Here are the most common issues I deal with as a local heating engineer.
Radiators Cold at the Bottom
This is the most common heating complaint I receive from homes in the Andover area. When the lower section of a radiator is cold while the top is warm, it usually indicates sludge buildup inside the radiator. The iron oxide sludge settles at the bottom and prevents water from circulating properly.
The fix: For individual radiators, removing and flushing can help. For system-wide sludge problems, a professional power flush is the most effective solution. I also fit magnetic system filters (such as the MagnaClean) to prevent future sludge buildup.
Boiler Losing Pressure
If you are regularly topping up your boiler pressure via the filling loop, there is a leak somewhere in the system. Common sources include weeping radiator valves, corroded pipe fittings, or a failing expansion vessel within the boiler itself.
The fix: I carry out a systematic pressure test to trace wet-side leaks. In older Andover properties, the culprit is often buried pipework running beneath floorboards -- once located, the repair is usually straightforward and ends the constant inconvenience of pressure loss. If the fault turns out to be inside the boiler (such as a failed expansion vessel), that's one for a Gas Safe registered engineer, who I can recommend.
Uneven Heating Between Rooms
Many homes in Marlborough and the surrounding SN8 villages have been extended over the years. When radiators are added to extensions without properly balancing the system, some rooms overheat while others remain cold. Poor pipe sizing and incorrectly adjusted lockshield valves are typical causes.
The fix: Balancing the system by adjusting the flow rate to each radiator ensures even heat distribution. In some cases, upgrading undersized pipes or adding a larger radiator to a particularly cold room is necessary.
Noisy Boiler or Heating System
Kettling (a rumbling sound like a kettle boiling), banging pipes, or clicking from radiators all indicate problems that should not be ignored. Kettling is usually caused by limescale or sludge buildup on the heat exchanger -- particularly common in hard water areas like Hungerford and the RG17 postcode area.
The fix: Kettling on the boiler's own heat exchanger is one for a Gas Safe registered engineer to assess -- I can recommend a trusted one. For system-wide noise, though, a power flush combined with a scale inhibitor and a magnetic system filter tackles the root cause on the wet side. Banging pipes may simply need clip adjustments to allow for thermal expansion.
Frozen Condensate Pipe
Modern condensing boilers produce acidic condensate that drains through a plastic pipe, usually routed externally. During severe cold spells in our area, this pipe can freeze, causing the boiler to shut down with a fault code. This is a frequent winter call-out across Andover, Tidworth (SP9), and the exposed villages along the Hampshire/Wiltshire border.
The fix: As an emergency measure, pouring warm (not boiling) water over the frozen section can restore operation, and lagging the exposed run helps stop it refreezing. If the condensate pipe needs rerouting or resizing, that's part of the boiler installation and one for a Gas Safe registered engineer -- I can recommend a trusted one.
WaterSafe Approved & Properly Qualified
It is a legal requirement that anyone working on gas appliances in the UK must be registered with the Gas Safe Register. This replaced the old CORGI registration in 2009. As a homeowner, you have the right to ask to see an engineer's Gas Safe ID card before they start any gas work. Rosebourne Plumbing specialises in the wet side of heating and does not carry out gas or oil work -- for that we'll always point you to a trusted Gas Safe registered engineer.
My Qualifications
- WaterSafe / WRAS Approved
Recognised for plumbing and heating work carried out to water regulations standards
- G3 Unvented Hot Water
Qualified to install and service unvented hot water cylinders (Megaflo, etc.)
- G1 ASHP Trained
Trained on the wet side of air source heat pump systems, including heat pump cylinders
- City & Guilds Qualified
City & Guilds qualified in plumbing and domestic heating installation
What This Means for You
When you hire a WaterSafe approved, G3 qualified plumber, you know the wet-side work will be carried out safely and to the required standard. For anything involving gas -- such as a boiler service, which by law must be done by a Gas Safe registered engineer -- always check the engineer's Gas Safe ID card, which you can verify on the Gas Safe Register.
My qualifications in unvented hot water (G3) and heat pump cylinders (G1 ASHP) mean I can advise on the wet side of the full range of heating options. Whether you want to upgrade your hot water cylinder, replace a heating pump, or prepare pipework for a future heat pump, I can handle it -- and coordinate with a Gas Safe engineer where the boiler is involved.
View all qualifications and certificationsHeating Services Pricing: Andover, Marlborough & Hungerford
I believe in transparent, honest pricing with no hidden fees. Every quote includes labour, materials, and any paperwork required for the wet-side work. Here is a guide to typical heating costs in the Andover and Marlborough area.
| Service | Typical Cost | Includes |
|---|---|---|
| Central Heating Pump Replacement | From £150 + VAT | Supply and fit replacement pump, system drain and refill, bleed and test |
| Hot Water Cylinder / Immersion Heater | From £150 + VAT | Diagnostic, immersion heater or cylinder work, unvented (G3) systems catered for (parts additional if required) |
| Radiator Installation | From £150 + VAT | Supply and fit, including TRV, pipework, system drain and refill |
| Power Flush | From £450 + VAT | Full system clean, chemicals, inhibitor, magnetic filter check |
| Day Rate | £525 | Full day of heating work, ideal for multiple radiators, system upgrades, complex jobs |
| Emergency Call-Out | From £285 | Urgent heating repair, payment required before call-out |
All prices are subject to survey. Complex installations and period properties may require additional work. I always provide a detailed written quote before starting any job, so you know exactly what to expect.
Areas We Cover for Heating Services
Based in Great Bedwyn (SN8), I provide wet-side heating services across the Hampshire, Wiltshire, and Berkshire borders. Here are the main towns and surrounding villages I cover.
Andover (SP10/SP11)
Our busiest area for heating work. Covering Andover town centre, Augusta Park, and surrounding villages.
Villages: Upper Clatford, Shipton Bellinger, Appleshaw, Weyhill, Enham Alamein, The Wallops
Marlborough (SN8)
Period properties and country homes across the Marlborough area, with many requiring specialist heating knowledge.
Villages: Ramsbury, Aldbourne, Burbage, Savernake, Mildenhall, Axford, Chilton Foliat
Hungerford (RG17)
Heating services for Hungerford town and the Berkshire border villages, including properties with hard water challenges.
Villages: Lambourn, Great Shefford, Chilton Foliat, Inkpen, Kintbury, Combe, Fawley
Tidworth & Ludgershall (SP9/SP11)
Serving the military and civilian communities with reliable wet-side heating services.
Villages: Bulford, Durrington, Larkhill, Figheldean, Netheravon, Perham Down
What to Expect When You Book Heating Work
Whether you are booking a radiator installation or need a heating problem diagnosed, here is how the process works when you choose Rosebourne Plumbing.
Get in Touch
Call 01264 502027 or use the online contact form. Describe the issue or the service you need. I will ask a few questions to understand the scope before quoting.
Receive Your Quote
You will receive a clear, written quote with no hidden fees. For larger jobs, I may need to visit first to survey the work -- this is always free of charge.
Book Your Appointment
Choose a date and time that suits you. I aim to be flexible and will confirm the appointment via text. For routine services, I can usually attend within a week.
Work Completed
On the day, I arrive on time in a clean, liveried van. All wet-side work is completed to WaterSafe standards, left clean and tidy, and backed by a 12-month guarantee.
When Should You Call a Professional?
Some heating issues are safe to investigate yourself, and some wet-side jobs are ones I can help with. Anything involving gas -- including boiler faults and gas pipework -- must be handled by a qualified Gas Safe registered engineer, not a wet-side plumber. Here is a quick guide to help you decide.
Safe to Check Yourself
- Bleed radiators to release trapped air
- Top up boiler pressure via the filling loop
- Check thermostat batteries and settings
- Reset the boiler (press reset button once)
- Check timer/programmer settings
- Pour warm water on a frozen condensate pipe
Call a Professional
- You smell gas -- call the Gas Emergency line (0800 111 999) first, then a Gas Safe engineer
- Boiler keeps locking out after reset -- one for a Gas Safe engineer
- Black or sooty marks around the boiler -- a Gas Safe engineer must investigate
- Any work involving gas pipework or connections -- Gas Safe registered only
- Persistent pressure loss (weekly top-ups) -- we can trace the wet-side leak
- No hot water despite heating working -- cylinder, immersion or pump
- Radiators remain cold after bleeding -- likely sludge, a job for a power flush
- A failed or noisy central heating pump needs replacing
Heating Efficiency Tips for Andover & Marlborough Homes
With energy prices remaining high, making your heating system more efficient is one of the best investments you can make. Here are practical steps I recommend to homeowners in the Andover and Marlborough area.
Fit TRVs to Every Radiator
Thermostatic radiator valves let you control the temperature in each room individually. Turn down radiators in rooms you do not use regularly, and you could save 10-15% on your heating bills. I supply and fit TRVs from around £35-50 per radiator.
Install a Magnetic Filter
A magnetic system filter (such as MagnaClean or Fernox TF1) sits on the return pipe to your boiler and catches metal debris before it can damage the heat exchanger. This extends boiler life, maintains efficiency, and costs from £150 + VAT installed.
Upgrade Your Controls
Replacing an old mechanical timer with a modern programmable thermostat or smart heating control (such as Hive, Nest, or Tado) gives you much better control over when and how your heating operates. Many offer phone app control so you can adjust heating remotely.
Book an Annual Boiler Service
A serviced boiler runs more efficiently than a neglected one. By law a boiler service must be carried out by a Gas Safe registered engineer, so book one each year -- we can recommend a trusted local engineer. Pair it with a clean, sludge-free system on the wet side and a well-maintained boiler can last 15 years or more.
Power Flush Before a New Boiler
If you are having a new boiler installed, always have the system power flushed first. Fitting a new boiler onto a dirty system can void the manufacturer warranty and cause premature failure of the new heat exchanger.
Insulate Your Pipes
Lagging exposed pipework in unheated areas (lofts, garages, under floors) prevents heat loss and protects against freezing in winter. Pipe insulation is inexpensive and can be fitted quickly -- or you can DIY with foam tube insulation from any hardware shop.
Frequently Asked Questions: Heating Services Andover
How often should I have my boiler serviced in Andover?
An annual boiler service keeps it efficient, catches problems early, and keeps your manufacturer warranty valid, and the best time to book is September or October, before the heating season begins. A boiler service must be carried out by a Gas Safe registered engineer. Rosebourne Plumbing focuses on the wet side of your heating -- radiators, power flushing, hot water cylinders and pipework -- and we are happy to recommend a trusted Gas Safe engineer for the boiler itself.
How much do heating services cost in Andover, Marlborough and Hungerford?
Our standard minimum charge is £150 + VAT for wet-side heating work including radiator installation, repairs and diagnostics. Power flushing starts from £450 + VAT depending on system size. Our day rate for larger projects such as multiple radiators or system upgrades is £525. All pricing is transparent with no hidden fees.
What should I check when hiring a heating tradesperson in Andover?
Anyone working on gas appliances must be Gas Safe registered -- this is a legal requirement, and you can verify registration on the Gas Safe Register website. Rosebourne Plumbing is WaterSafe approved and G3 qualified for unvented hot water systems, and we also hold City & Guilds and G1 ASHP training for wet-side heat pump cylinders. We do not work on gas or oil, so for any boiler or gas work we will happily recommend a trusted Gas Safe engineer.
Do you offer emergency heating repair in Andover?
Yes, we provide emergency wet-side heating repair -- leaks, burst pipes, failed pumps and cold radiators -- across Andover (SP10/SP11), Marlborough (SN8), Hungerford (RG17), and Tidworth (SP9). Our emergency minimum is £285, with payment required before call-out. For gas boiler emergencies you will need a Gas Safe engineer, and we can point you to one. For non-emergency heating issues, we aim to attend within 24-48 hours.
What areas do you cover as a heating engineer near Andover?
We serve Andover (SP10/SP11), Marlborough (SN8), Hungerford (RG17), Tidworth (SP9), Ludgershall (SP11), Pewsey (SN9), Stockbridge (SO20), and Great Bedwyn (SN8). This includes surrounding villages such as Upper Clatford, Shipton Bellinger, Weyhill, Ramsbury, Aldbourne, Kintbury, and Lambourn.
Related Heating Guides
Central Heating Maintenance Checklist 2026
Monthly DIY checks, seasonal tasks, and when to call a professional. Keep your heating running efficiently year-round.
Central Heating Sludge Removal Guide
How to identify sludge problems, the power flushing process explained, and costs for Hampshire homeowners.
Central Heating Pump Guide UK 2026
Signs your heating pump is failing, replacement costs, and choosing the right pump for your system.
Need Heating Work Done in Andover?
WaterSafe approved, G3 qualified, fully insured, and based locally. Whether you need a radiator installation, power flush, central heating pump, hot water cylinder, or emergency wet-side repair, get in touch for a free, no-obligation quote. We don't work on gas or oil -- but we'll happily recommend a trusted Gas Safe engineer.
Serving Andover (SP10/SP11) | Marlborough (SN8) | Hungerford (RG17) | Tidworth (SP9)