Homeowners in Test Valley, Hampshire, are sometimes not sure of what to do when a burst pipe affects their home. Though it is an uncommon occurrence, knowing what to do if a pipe burst anywhere in your house is essential. Water damage to floors, walls, and valuable belongings is joint among homeowners who have little understanding of the issue.
Rosebourne Plumbing, on the other hand, understands how to assist Test Valley residents in need when they experience a burst pipe. Our plumbing repair experts explain the causes, the warning signs, and what to do if you have a burst pipe at home. It’s simpler than you think! When you follow these recommendations, your house will suffer minimal water damage, and the pipe in issue will be as good as new in no time.
What are the most common causes of a burst pipe?
A burst pipe does not usually happen overnight, so keep a watch on your plumbing system all year. The following are some of the most frequent reasons for pipe breaks.
- Corrosion. Firstly, corrosion causes pipelines to break. Corrosion happens as a result of pH abnormalities in the water. Rust also contributes significantly to corrosion. In either scenario, corrosion occurs gradually over time until the pipe eventually bursts out. Rust and pH imbalances weaken the pipe’s strength, resulting in leaks and bursts.
- Movement. In most cases, pipe movement is unintentional. In some instances, pipes shrink in the winter due to the extreme cold. Shifts may also occur due to repairs to other sections of the plumbing or if the water pressure gets too high and causes the pipes to shake. The main water burst happens when the flow rises in that region.
- Clogs. Another contributor to water pressure is the presence of clogs in the pipe. When the clogs are near the drain pipes, it does not create too much difficulty for the pipe system. But if a clog develops further down the pipe, the pressure rises, which may cause the water to back up behind the blockage. Because there is nowhere else for the water to go, it leaks outside of the pipe. A burst pipe occurs when the pressure gets too high for the metal to withstand.
Common Signs of a Burst Pipe
As previously highlighted above, a burst pipe can wreak havoc on your homes. And it is preferable to check out for common signs of a burst pipe. If you notice more than one of these problems, you most likely have a burst pipe.
- Water pressure issues: Water pressure is a call of concern to your plumbing system because a burst directly impacts how well water flows through the pipes. Low water pressure indicates a rupture or leak. When a pipe bursts, water flows straight through the hole rather than via the faucet, lowering your water pressure.
- Stains on the walls: Stains may appear on the wall due to various causes, but significant water stains on walls generally signal a problem with the pipes. These stains may also be seen on the ceiling. In most instances, the stain indicates the site of the burst pipe. In that regard, wall stains are among the most valuable indications of a burst pipe since they may be used to pinpoint the precise location of the pipes.
- Water discoloration: This may potentially signal a busted pipe. Strange hues, on the other hand, indicate a variety of other problems. Brownish water, for example, is caused by high manganese concentrations but does not always indicate a pipe break. Nonetheless, reddish water typically signals rust in the pipes, which may cause breaches. Be aware of the color of your water and check for other possible symptoms if it changes.
- An increase in Water bill: High water costs are often the result of broken pipes. Excessive quantities of water flow through the hole or crack, wasting water and increasing your cost. Another common sign of a burst pipe is that it influences water pressure, and as a result, homeowners must use more water than usual to reach the desired pressure.
What to do if you have a burst pipe
Homeowners in Test Valley and its environs have more influence over burst pipes than they realize. While actual repairs must be left to Rosebourne Plumbing experts, there are certain things you may do to mitigate water damage. These take minimal plumbing expertise and are simple methods to keep water away from essential items in your house. Use these basic techniques before calling a plumber.
- Turn off the main water valve: First and foremost, cut off the water supply. When a pipe bursts, you don’t want any additional water in the system. The water that is already in the pipeline is much simpler to manage than any other water. Wait until the plumber says you may turn the water back on.
- Ensure to clear the water: To prevent extra water damage, remove any standing water as soon as possible. When a pipe breaks, some water damage is unavoidable; nevertheless, the sooner you clear the water, the less probable permanent damage to your belongings will occur. Fast cleaning also prevents mold and mildew from growing. The longer the water remains, the more probable these chemicals may develop, therefore clean and dry the area as soon as possible.
- Drain your faucets: Drain faucets to remove any remaining water in the system. Water removal relieves some of the pressure in the pipes and ensures that they are dry, preventing further water leakage. To drain the water from the toilets:
- Flush them several times.
- Begin with cold water and work your way up to hot water.
- When you do this, shut down the boiler or water heater.
- Allow warm air to flow in: frozen pipes must be slowly warmed to prevent further damage. Turn up the heat in your home to accomplish this. And if the heat is still insufficient, warm the pipelines with a hairdryer. Despite its slowness, this heats the pipes slowly enough to prevent any other burst. Temperature fluctuations sometimes cause a burst pipe.
- Maintain an open-door policy: Keep doors open to allow warm air to flow. More air circulation is required in rooms with exposed pipes to dry the pipes and the surroundings. Make sure air flows continuously if you want the pipes to dry as soon as possible. The warmer the airflow, the quicker the water dries.
- Hire the services of a plumber: Do this as soon as you can to minimize any damage. You never know when the plumber will be able to arrive at your house, so contact as soon as possible to avoid a long wait. A professional plumber will repair the burst pipe and ensure no further leak in your home. Plumbing maintenance also reduces the likelihood of a burst pipe, so plan maintenance visits to avoid this issue throughout the year.
Rosebourne Plumbing Homecare for Burst pipes
The best way to protect your home and bank balance against the damage and expense of a burst pipe is to take out home cover.
Our homeowner and landlord care packages include a boiler leaking water and broader central heating repairs, as well as protection for your plumbing and water supply pipes. Get a quote from our website or contact the team on +44-1264-502027.
Test Valley Burst Pipe Repair Services
Burst Pipe Repair Services in Test Valley, Hampshire
SERVING TEST VALLEY DISTRICT & SURROUNDING COUNTIES
Do you need a “Burst Pipe Plumber Near Me” in Test Valley, Hampshire? Call (+44-1264-502027) today for efficient plumbing repairs and friendly service from Rosebourne Plumbing. Suppose you are experiencing a frozen or burst pipe and require an emergency Burst Pipe Repair service in Test Valley District, Hampshire. In that case, you will want a professional local plumbing company that will treat you right. Our plumbing company thinks of its customers like family and cares about the turmoil you are now enduring! You don’t have to look any further—you just found Test Valley Burst Pipe Repair Specialists at Rosebourne Plumbing.
We are leading local plumbing repair and maintenance service in Test Valley District, in Hampshire, England. We are “Local Plumbers that you can depend on and trust.”
Our Plumbing experts take the time to discuss what we are doing and how we will do it with Hampshire homeowners. We give the customer control/ability to make decisions, be informed, have peace of mind, take a deep breath, and know everything is in hand.
COMMITTED TO OUR CUSTOMERS’ SATISFACTION
We are a household brand across Test Valley synonymous with highly valuable service plans, exceptional service, friendly and consistent communication. We don’t just provide superior leak detection and repair services in Hampshire—we also aim for unmatched customer service. We would be delighted to fix any of the below services for you:
● Plumbing Repairs and Maintenance
● Drain Cleaning
● Emergency Plumbing
● Radiator Bleeding
● Radiator Repair
● Tap Repair
● Toilet Repair
● Kitchen Plumbing
● Leaks – Overflow, Toilet, Kitchen Sink
● Fitting outside Taps
● Flush Repairs
● Tap Repairs, dripping taps, securing taps
● Replacing cartridges in the tap
● Shower repairs, calibrating heat, fixing dripping shower head
● Plumbing Inspection
Think you may need an emergency Burst Pipe Repair service? Call us today at +44-1264-502027!